Pentalite Electrical Sdn Bhd
29, Jalan Ros Merah 1/1,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+607-3521000
+607-3515813

Automatic Voltage Stabilizer (V-Series) - Single Phase

Previous 2 / 2 Next

Automatic Voltage Stabilizer (V-Series) - Single Phase V-Series Automatic Voltage Stabilizer


QPS  Single Phase Servo- Motor Automatic Voltage Stabilizers (AVS) are designed to cater for:-

  • Input voltage variation from: Single Phase : 230V ± 12%;
  • Excellent output voltage accuracy of within ±1.5% set value.
  • Regulation response time approximately 0.05 ~ 0.07 sec per volt.
  • Minimum maintenance due to its simplicity in design.
  • Easy installation.
  • Tailor make to special voltages and configuration are available.

QPS   Servo - Motor Automatic Voltage Stabilizer provides a continuous monitoring of the output voltage (true RMS sensing) by means of an electronic Control Circuit that compares the instantaneous output voltage with the set value. When changes are detected due to fluctuation of supply voltage or sudden changes in load, an electrical signal will be transmitted to the servo - motor which is coupled onto the brush gear of the variable transformer, causes the brush gear to rotate until the appropriate voltage, is restored. This method of stabilization does not create interference or harmonic in the supply system.

APPLICATIONS:

  • CNC wire- cut / EDM
  • CNC drilling machine
  • CNC milling machine
  • X - Ray equipment
  • Industrial robots
  • Communication system
  • PLC Equipment
  • Broadcasting equipment
  • Photographic processing equipment
  • Photocopy machine
  • Test equipment
  • Computers
  • Medical equipment
  • LAB equipment

TECHNICAL SPECIFICATIONS:

 

 

1-SINGLE PHASE

Input Voltage

230Vac ± 12%

Output Voltage (true RMS)

230VAC ± 1.5%

Rated KVA

1KVA - 30KVA

Output Waveform / Distortion

Sinewave / Follow Input

Response Time

0.05 ~ 0.07 Sec / V

Frequency

50 / 60Hz

Efficiency

> 95%

TVSS Protection (surge)

Standard

Over Current Protection

MCB / MCCB

Phase Loss Sensing Protection

Phase Sensing Relay / Optional

Automatic Output Delay ON System

Time Delay / Optional

Operating Temperature

0°C - 45°C

Specifications are subject to change without prior notice.
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Recent Updates